Sherwin-Williams announced the launch of the high-solids Sherplate 600 epoxy phenalkamide lining, suited to be applied on potable water assets.
Ahead of new regulations that go into effect in January 2023 for potable water assets, Sherwin-Williams Protective & Marine has launched Sherplate™ 600, a high solids epoxy lining that’s completely free of the restricted solvents. The lining meets the new NSF/ANSI/CAN 600: Health Effects Evaluation and Criteria in Drinking Water standard, which will drastically reduce the Maximum Contaminant Levels (MCLs) of xylene, toluene and ethylbenzene found within coating and lining products certified for potable water storage use. Sherplate 600 epoxy phenalkamide lining does not contain xylene, toluene, ethylbenzene or even oxsol, which may lose exempt status in the very near future.
Most of the coatings to be approved under NSF/ANSI/CAN 600 will feature 100% volume solids, as such ultrahigh solids materials include minimal to no solvents. However, certain high-solids coatings, such as Sherplate 600, that lack the restricted solvents will be permitted. This offers applicators advantages as the 89% volume solids Sherplate 600 is easier to apply than 100% solids formulations
and can be sprayed using either single-leg or plural-component equipment. The coating sprays more like the single-leg sprayable, 70% solids epoxy linings poised for elimination under NSF/ANSI/CAN 600. Therefore, applicators not familiar with plural-component equipment will have an easier learning curve for spraying Sherplate 600 compared to applying 100% solids linings.
“With the NSF/ANSI/CAN 600 implementation coming so soon and with all of the unknown variables looming around exempt solvents, asset owners and engineers should consider specifying Sherplate 600 today to achieve their clean water delivery goals of tomorrow and into the future,” said Paul Trautmann Marketing Director, Water Infrastructure for Sherwin-Williams Protective & Marine Division. “Specifying Sherplate 600 today will help owners achieve maximum corrosion protection and environmental compliance as well as support the contractor’s need for efficient, constructable product solutions. We are very excited to introduce this product into the marketplace as a transformational solution to meet new regulatory requirements.”
Sherplate 600 can be applied up to 16 mils dry film thickness (DFT) per coat and up to a total thickness of 24 mils DFT. That high film-build capability coupled with the coating’s high edge-retention capabilities, enable the material to be used for stripe coating welds, edges and corners before completing full lining applications.
Approved for potable water use in water tanks, pipes, ductile iron pipes and water treatment plant assets, Sherplate 600 complies with AWWA D102 Inside Coating Systems (ICS) 1, 2,5 and 6 as well as AWWA D102 Outside Coating Systems (OCS) 5 and 6. It has a semi-gloss finish and is available in white, light blue, buff and red colours. The lining also has a low odour and a volatile organic compound (VOC) content of <100 g/L.